Inspect a vehicle.

Check a truck in five short steps and sign the result.

  • 6 steps
  • 4 min read
Start step one

Part of the path for Service managersTechnicians

Before you start

Sign in with access to Fleet. Your company's vehicle tracking service must be connected, because the list of trucks and the current kilometres come from it. The practice workspace used for these pictures has no trucks, so only the first two steps are shown.

Practice withNorth Ridge BuildersMaya ChenRooftop equipment replacement

What is a vehicle inspection?

A vehicle inspection is a short check of a company truck or van. The driver answers a list of checks, marks any damage on a picture of the truck, takes a photo of the inside and signs.

Do an inspection when your company asks for one, for example once a month. Many companies put a QR sticker in each truck. Scanning it with a phone opens the same inspection with the truck already chosen.

The signed inspection is saved on the vehicle. Problems found are sent to the person who reviews inspections, and they show in the Fleet list under Last vehicle inspection and Reviewer decision.

01/06

Start an inspection

In the left side menu, click Fleet. Then click Start an inspection at the top right.

02/06

Choose a truck

The inspection has five parts, shown in the bar at the top: Truck, Check, Damage, Photo and Sign. In Truck, type the truck, plate or driver and choose it from the list. Date is filled in for you. Check Current km and change it only if the dashboard shows a different number. Driver and Department fill in by themselves. Click Next. In the picture the list is empty and a red message shows, because this practice workspace has no trucks.

03/06

Answer the checks

In Check, go through each group and choose an answer for every item. If an item fails, say what needs to be fixed and add a photo when asked. If a safety item fails, do not use the truck until it is fixed.

app.polarpath.ca/fleet/inspections
Screenshot coming

Not captured: the practice workspace has no vehicles because no vehicle tracking service is connected, and vehicles cannot be added by hand. Capture in a workspace with a connected fleet, with plates and driver names blurred.

04/06

Mark any damage

In Damage, tap the picture of the truck where it is damaged and say what is wrong. If there is no damage, go on to the next part.

app.polarpath.ca/fleet/inspections
Screenshot coming

Not captured: the practice workspace has no vehicles because no vehicle tracking service is connected, and vehicles cannot be added by hand. Capture in a workspace with a connected fleet, with plates and driver names blurred.

05/06

Take the cabin photo

In Photo, take a photo of the inside of the truck. The photo must be taken within the last 24 hours. PolarPath checks that the cabin is clean. If the check does not pass and the cabin is clean, tick the box that says you confirm the cabin is clean and tidy.

app.polarpath.ca/fleet/inspections
Screenshot coming

Not captured: the practice workspace has no vehicles because no vehicle tracking service is connected, and vehicles cannot be added by hand. Capture in a workspace with a connected fleet, with plates and driver names blurred.

06/06

Sign the inspection

In Sign, add any comments in Additional comments. Then click Finish and sign and sign with your own PolarPath account. The signed inspection is saved on the vehicle and sent for review.

app.polarpath.ca/fleet/inspections
Screenshot coming

Not captured: the practice workspace has no vehicles because no vehicle tracking service is connected, and vehicles cannot be added by hand. Capture in a workspace with a connected fleet, with plates and driver names blurred.

The result.

The inspection is signed and saved on the vehicle. The Fleet list shows the new date under Last vehicle inspection. Any failed item goes to the reviewer.

If you get stuck

If you see The vehicle list is temporarily unavailable or No trucks found, the tracking service is not connected or is not answering. The list tries again by itself. If it stays empty, tell your administrator. If Next does nothing, a required field is empty: choose a truck and check Date and Current km. If a truck is missing driver or department information, ask a supervisor. If the photo is refused, take a new one: it must be recent and not too large.

What to do next