Build an inspection form.
Make a form your technicians fill in when they inspect a piece of equipment.
- 5 steps
- 3 min read
Part of the path for Service managers
Before you start
Sign in as an administrator. To attach the form by itself, the asset type must already exist, for example the type Rooftop used for the asset Rooftop unit 1 at North Ridge Builders. All names are fictional.
What is an inspection form?
An inspection form is a list of questions a technician answers while checking equipment on site, for example: Are the filters clean? Is there a leak? Take a photo of the unit. Each answer can be a pass or fail, a number, a date, a choice from a list or a photo.
You build the form once in Settings. With Auto-attach to asset types, the form is added by itself to every asset of that type, for example every Rooftop unit. The technician then opens the asset, starts the inspection and answers the questions.
An inspection form is different from a job checklist. An inspection form belongs to a piece of equipment. A job checklist belongs to a work order and lists the steps of the job.
Open Settings
In the left side menu, under Administration, click Settings.
Open Inspection forms
In the list of settings on the left, click Inspection forms. The page shows how many forms you have and the Form library. Click New inspection form at the top right.
Name the form and choose where it goes
In Title, enter a clear name, for example Rooftop unit spring check. In Description, say what the form is for. Set Status to Active when the form is ready to use: a Draft form is not offered to technicians. In Auto-attach to asset types, type the asset type, for example Rooftop, and press Enter.
Add the questions
In Question 1, type the question, for example Filters are clean. In Type, choose the kind of answer: Pass / Fail / N/A, Yes / No, Short answer, Paragraph, Number, Date, Time, Dropdown, Multi-select or Photo. Turn on Required if the question must be answered. Click Add question for each new question.
Save the form
Click Save form at the bottom right. The form appears in the Form library with its status, the number of questions and the asset types it is attached to.
The result.
The new form is in the Form library. Every asset of the chosen type now has it on its Inspections tab, ready for a technician to fill in.
If you get stuck
Title is required. A form with the status Draft is saved but not offered to technicians: change it to Active. Use Archived to retire an old form without losing its past answers. Under each question, Show this question lets you show it only when an earlier answer has a set value, for example show Describe the leak only when Leak found is Yes.
What to do next
Add a piece of equipment
Record the equipment you look after at a customer site.
6 simple steps →AssetsFind an asset and see its history
Look up a piece of equipment and see the work done on it.
6 simple steps →Inspection formsBuild a job checklist for work orders
Make a list of steps and questions that technicians fill in on a work order.
7 simple steps →