Create an RFI on a project.

Write down a question for the customer or the designer and track the answer.

  • 6 steps
  • 4 min read
Start step one

Part of the path for Project managers

Before you start

Sign in with access to Projects. The project must already exist and be active. This example uses the project North Ridge office retrofit for North Ridge Builders. All names and details are fictional.

Practice withNorth Ridge BuildersMaya ChenRooftop equipment replacement

What is an RFI?

RFI stands for request for information. It is a formal question about the job that you send to the customer, the engineer or the architect. You use it when the drawings or the scope are not clear and you need an answer before you can go on.

An RFI keeps the question, who has to answer, the date you need the answer by and the answer itself in one record. That way nobody has to search old emails to prove what was asked and what was agreed.

An RFI is different from an issue and from a change. An issue is a problem you track inside your own team. A change is a change to the price or the scope. An RFI is only a question. If the answer changes the price, you then record a change.

01/06

Open the project

Click Projects in the menu on the left. Then click the project in the list.

02/06

Open RFIs and start a new one

On the project page, click the RFIs tab. Then click New RFI on the right.

03/06

Write the subject

In Subject, write a short line that says what the question is about, for example: Confirm roof opening size for new unit. Leave Priority as Normal, or choose High if work is waiting on the answer. You can also pick a date in Answer due.

04/06

Add the question

Click Add question. In Question, write the full question in plain words. Click Add question again if you have more than one.

05/06

Create the RFI

Click Create RFI at the bottom. The RFI is saved and shows in the RFIs list with its number, RFI-00001, and the status CREATED. Nothing has been sent yet.

06/06

Send it when you are ready

Open the RFI. Send RFI at the top emails the question to the people you choose. The status then changes from Created to Sent. In this guide we stop here and do not send it.

The result.

The RFI is saved on the project as a draft with the status CREATED. The Drafts tile on the RFIs tab shows 1. It stays there until you send it and later record the answer.

If you get stuck

If Create RFI does nothing, check that Subject is filled in: it is the only field you must fill. If Assigned to says No people found, the project has no team members yet. You can still create the RFI. Use the Impacts switches, Schedule impact, Cost impact and Design change, to flag why the answer matters. Use Overdue on the RFIs tab to see questions that are past their answer date.

What to do next